refractory low cement castable/high alumina castable
Model Number: HT-Castable
Certification: ISO 9001
Minimum Order Quantity: 1 Ton
High aluminum castable: It is a kind of castable with a cement content of less than 8%. Unlike ordinary refractory castables, most of the calcium aluminate cement in the matrix is replaced by ultra-fine powder (Ecken), and with the addition of appropriate additives to achieve and exceed the performance of ordinary cement castables.
The main features of aluminum castables are as follows:
1. The low content of cement in the castable, that is, the low content of calcium oxide, reduces the generation of low-melts in the material, thereby improving the refractoriness, high-temperature strength and slag resistance of the product.
2. The mixing water consumption of the castable is only about one-half of that of the ordinary castable, thus increasing the compactness of the castable and reducing the porosity.
3. After forming and curing, the generated cement hydrate is less. When heating and baking, there is no large amount of water leakage, which reduces the medium temperature strength. However, as the temperature increases, the material gradually
sinters and the strength is continuously improved.
The lightweight castable is made of aluminate cement high alumina fines, ceramsite, plus a number of additives. The product has light volume, high compressive strength, acid and acid gas corrosion.
It has the characteristics of heat insulation, heat preservation and low water absorption. It is easy to construct and is the most ideal product for the construction of alkali-resistant parts under high temperature.
Good workability, strong adhesion, long initial setting time and long operation time, strong strength growth, strong impermeability, no need for acid treatment, easy to ensure the dense and fullness of masonry gray joints, can significantly improve the chimney lining The airtightness, integrity and corrosion resistance of the lining are ideal cementing materials for high chimneys, high temperature flue and duct lining.
They can also be used for acid resistance tanks and tanks in petroleum, chemical and nonferrous metallurgy industries. engineering.
Acid-resistant bricks, acid-resistant clay and wipes acid-resistant bricks, acid-resistant clay and wipes are refractory materials specially developed by our factory for heat preservation of power station boiler chimneys and heat network pipes. It has acid corrosion resistance, temperature resistance and heat resistance stability. The construction is convenient.
High-strength wear-resistant castables
1. Coal unloading ditch, coal hopper, coal storage bin, dry coal fence, dumper, slag machine, water treatment, etc.
2. Anti-corrosion ground, pump foundation, etc. in the chemical industry
3. Wear-resistant linings in media barrels, scrapers, bucket elevators, etc. in the coal industry
4. Blast furnace mixing bins in the steel industry, sintering silos, ball making machines, etc.
High-strength wear-resistant castable product features
1. High strength, high anti-wear, anti-scour and anti-oil penetration.
2. Good flame retardancy, low water absorption, high temperature resistance.
3. Durable and long service life.
4. Construction is simple and easy to operate.
5. Good overall, easy to repair, not easy to fall off.
6. Non-toxic, odorless, green and environmentally friendly to the operator.
Production capacity: Our factory actively response to government environmental protection policy, we designed and built the fully automatic controlled high temperature gas tunnel kiln (1700℃), and got capacity of annual output 70,000 tons of high quality refractory products.
★Bricks: Fumigated wooden pallet with log paperboard covered and stainless steel band strapping, the whole outside is wrapped with thermoplastic film. Or carton packaging.
★Wooden pallet size: usually 92*92cm (standard brick)
★Castable: Ton bag with rain film and 25kg bags inside
★Or according to customer’s requirements
★Port of dispatch: Tianjin port; Qingdao port
★Delivery time: According to customer’s demand or two sides negotiate
We provide you
★Timely response: Timely response to your inquiry within 24 hours and provide solution.
★Competitive Price: Make the products competitive in your market.
★Free sample: Free sample are offered, trial order are accepted for quality evaluation.
★Strict quality control: We set Quality Management System, from the raw material to finished products, produce high quality products according to chemical & physical specifications strictly to satisfy customers’ needs.
★Fast delivery time: Within 3-30 days according to your quantity after receiving your advance payment.
★ Professional services: Provide pictures from order to delivery. Inspect report by our country’s designated authority and oversea services if necessary.
We are here for you!
Certification: (ISO 9001:2015)
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours..